Dropped Phone In Water Screen Wont Work

Picture of Dropped Phone In Water Screen Wont Work

The only thing you can do with any phone is press home button and power button hold for 20 seconds and then it will turn black and then after it turns black it means it will work fine but if it doesn't just restart it and hopefully it will be fine or try plugging in the phone. Solution #1: Plug the phone in Solution #2: Put the phone in dry uncooked rice Solution #3: Get a refund where you bought it but have a receipt for it if the store gives refund or coverage of phone damage Solution #3: Sell it at a cellular device store they might repair it and sell it for exchange of money or another phone Solution #4: Leave it in the sun for at least 24 hours at least or overnight Solution #5: restart the whole phone

See Also: Girl From North Korea

The main reason of contemporary personal computer display savers is entertainment and occasionally even, protection. Nonetheless, they ended up in the beginning built to avert phosphor burn-in on plasma laptop monitors as well as CRT products. Display savers aided to prevent these damaging consequences by mechanically altering the pictures if the computer wasn't being used.

Let me inform you of a brain improving tactic I had stumbled on after loading an exceptionally large range of visuals into My Pictures file, which was automatically hooked, probably like your computer set up, to my display screen saver method. After sitting and looking at it at some point, I mentioned the way it spurred on my mind and enhanced my spatial reasoning previous to coming up with sessions. It seriously served and that i was amazed.

Did you just drop your phone in water? Forget to take it out of your pocket and accidently ran it through the washing machine? Dropped it in the toilet? Dropped your phone in your drink or soup? Were you pushed into the swimming pool with your phone in your pocket? Or just came in from the pouring rain to find your phone was soaked? Better Act Fast! Time can be a factor in saving your mobile phone from further damage.

Here is a list of things to do if your phone was exposed to water and some methods that can help you to save it. Take your phone out of the water! Remove your phone from the water or liquid as quickly as possible if you have not done so already. Don’t Press Anything Resist the urge to see if it’s still working: Don’t turn it on Don’t navigate Don’t press any keys Don’t use the phone Remove the battery If your phone will allow you to then remove the battery, and cut all the power to the device to decrease the chance of a short.

Remove it from its case If you keep your phone in a protective case then dry the outside of the case and then remove it. Try not to rock the phone to much to help prevent water from running into any of the phones ports, plugs, holes, cracks or spread further throughout the inside of the phone. Take off the removable parts If your phone has a SIM card or Memory card then take it out and if necessary set it aside to try as well.

SIMs are replaceable if needs be and most memory cards (at least the best memory cards) are waterproof. But take them out of the phone and leave the battery cover or back plate off to help with the drying process and allow those parts of your phone to vent. Dry the phone with a dry towel or cloth Dry the outside and any visible areas with a dry cloth or towel. Again take caution not to let any water into the openings of your device if possible.

DO NOT Blow it I do NOT recommend air in a can, a blow dryer, or even blowing air through your lips or a straw. You might cause heat damage with a blow dryer or adversely blow water into the phone or blow the water around that’s already into the phone and cause more damage. Do not take the phone apart Don’t unscrew the phone or try and open it to get access to the inside of the phone. Even though the LDI (Liquid Damage Indicator) on your phone was most likely activated voiding your warranty, taking the phone apart could void your warranty 100%.

So I don’t recommend it except as a last resort. Dry the phone You dried the outside and visible moisture as best as you could with a dry towel but now we have to dry the moisture that you couldn’t get to. Use a Vacuum – although blowing the water on the phone is a bad idea, sucking the water off and or out of the phone might not be. Just make sure that you use caution trying not to scratch the phone or create a static charge from the vacuum.

Use Rice - One of the most common tools for drying phones is uncooked rice. Get an airtight container or zip lock bag and bury your phone in rice. The rice will absorb the moisture and help dry out our phone. Silica Gel Packs – If you have any of these cool packets lying around (they are the gel packs you can find in shoeboxes) then these are great at absorbing moisture because that’s what they are meant to do.

Place some packets into an airtight container with your phone and wait for them to help dry it out completely. Note: old packets that have already been used will have already reached their absorption capacity and won’t work. Phone Drying Pouch – If you planned ahead and bought a phone drying pouch for just this situation then locate it and use it to assist you in drying the phone. If you don’t have one of these nifty packets then you can plan ahead for any future incidents and buy one for next time.

These packets are often sold by stores as well (including Wal-Mart) if you want to check online to see if they have any in stock or place your phone in rice in the meantime and then run down to the store and see if you can locate one. Wait for 24-48 hours Wait for the moisture in the phone to dry out completely. If you have another phone that’s the same carrier as your current one you might be able to use that device while your primary phone dries.

If your phone uses a SIM card then make sure your SIM is dry and insert it into another phone of the same wireless provider. Or simply take a break from your texting, tweeting, and networking and read a book or browse this awesome website instead /wink. Check the phone After a day or two of allowing the phone to dry check for moisture that might still be in or on the device. If moisture remains evident then do not re-insert the battery or accessories just yet.

Continue the drying process with the suggestions above again until the phone is completely liquid and moisture free. Attempt to power it on Try and turn your phone on listening for any irregular noises and listening to make sure that the speakers still work on the unit. Check the screen and make sure that it appears to be working properly visually and if your phone has a touch screen make sure to check the touch screen to make sure that it too is responding correctly.

If your phone does not power on If there is no response when attempting to power the phone on then plug your phone into a charger and see if you can get a response from the charger. This will help you to see if perhaps the battery was damaged or if it’s the phone itself. If you a friend or a family member has a battery of the same type you can try that as well. Addition things NOT to do to a wet phone Freeze your phone – I don’t recommend that you put your phone in the freezer for many reasons.

The chance of it causing additional damage is high because of many different factors. Use an oven or microwave – don’t use an oven or microwave to help dry out your phone. Apply heat – Applying heat from an external source will likely cause more damage to your phone. This could also cause your lithium ion battery to explode or start to leak, so don’t try it on your battery either. Tap or bang your device – If your device isn’t working after drying it then read the article mentioned at the bottom of this article.

DO NOT bang your phone against a hard surface to try and get it to work again. Along with liquid damage you might add some physical damage as well and it will be even more difficult to fix. More Tips If your phone was submerged at the beach and the salt water has gotten into it OR at a pool and has been exposed to water with chlorine in it then your phone might have a higher chance of being damaged or malfunctioning and you might also consider worrying about, minerals, possible corrosion or even calcium buildup forming and causing additional damage.

Some people recommend submerging your phone in clean water to remove the salt/minerals/chlorine water but I don’t recommend that because water, as you know, is a conductor and clean water can lead to a short, corrosion or calcium buildup just as well. Read the article mentioned below for some tips on fighting these forms of water damage. Still not working properly If your concerned with corrosion, calcium buildup or other damage, or your phone is simply not working properly even after drying completely, then I strongly suggest that you read “How to fix a water damaged phone” for some tips on how to get your phone working properly again.

Fixed and working correctly If your phone is up and running again then make sure everything is working properly, keep an eye on the functionality of your device and enjoy the continued use of your phone. I hope you enjoyed the article. If you have any other tips or tricks then don’t hesitate to leave a comment below.

Wilma Lawrence

If you’re prepared to personalize your desktop or monitor saver, or are prepared on a regular basis than the usual photo wallpaper, a awesome screen saver is perfect for you.