How To Replace Iphone 7 Screen

Picture of How To Replace Iphone 7 Screen

The latest news on the iPhone 6, apart from the fact it's not going to launch in May, is that Apple is switching from Gorilla Glass to sapphire crystal in an effort to beat scratches. However, an issue that has plagued more than a few butter-fingered owners is the fact that the screen, like any other smartphone screen can actually crack. In many video tests, Apple's smartphones actually fare better than many of the competitions' devices, but I've still seen plenty of iPhones around with cracked screens or at the very least large chunks of glass missing from the edges following unfortunate encounters with concrete.

Thankfully, replacing your iPhone's screen is actually very easy. It doesn't cost a lot either if you do it yourself and is likely to save you a huge amount compared to getting it repaired via Apple or a dedicated repair shop. Here's how to do it. Step 1. You have two options in terms of screen replacement. A complete screen section will cost more (around $60) but includes all the attached components such as the Home Button, making your life a lot easier.

In fact, once you're inside, you just need to detach three cables, attach the new screen and your done. Alternatively, you can buy just the screen element, which might save you $30 but you'll need to transfer over the Home Button and other bits.  I've opted for the complete kit, which I obtained from eBay and this comes with all the tools you need too. Step 2. To get inside your iPhone 5, you need to use the tiny star-shaped driver and undo the small screws either side of the Lightning port.

Be sure to keep them safe as they're easy to lose. Step 3. Using the suction pad, lift the screen out of the case of the phone. this can be tough but if you use one hand to hold the case and the other to to pull the screen it usually comes out with a little effort. you can also use the plastic pics included to work the screen out once you've made a gap. Step 4. Be careful not to lift the screen more than 90 degrees vertical as you may stretch the cables.

Notice our replacement screen on the right and the fact there are three connector cables. These are hidden under the top metal plate inside our phone. Step 5. The plate is held in place by three metal screws. Undo these with the standard cross-head screw driver and again, be very careful when you remove them as they're very small indeed. Step 6. The plate latches on the left hand side so nudge it to the left then lift it out using one of the plastic pics.

Don't force it out - it should come loose easily. Step 7. With the plate removed you'll now be able to see the three cables we need to attach. As you can see on our replacement screen, they are layered so deal with the top one first. Step 8. To detach the connectors, use one of the plastic pics or the flat blade screw driver and gently pry them off. This needs very little force and be sure to do it right from the edge of the connector.

See Also: Nose Job In Korea Cost

The primary purpose of contemporary laptop or computer display savers is enjoyment and from time to time even, protection. Having said that, they have been at first created to avert phosphor burn-in on plasma personal computer monitors also as CRT equipment. Monitor savers helped to circumvent these adverse outcomes by mechanically altering the pictures if the personal computer wasn't getting used.

Let me convey to you of the mind enhancing system I'd stumbled on immediately after loading an incredibly massive number of visuals into My Pictures file, which was automatically hooked, most likely like your laptop or computer established up, to my display saver program. After sitting down and viewing it one day, I observed how it spurred on my mind and improved my spatial reasoning before creating periods. It seriously aided and that i was surprised.

I lived my nightmare this week.  Talk about first world problems.  My iPhone just flew out of my hands and landed face down on the tile.  I knew before I picked it up that my number had come.  I also never pay for an insurance plan.  I figure the money I save over time there makes up for what I will have to put out to replace or fix a broken phone and usually that is true.In this case it was definitely true.

  I fixed my completely broken iPhone front for around $35 total.  It was either that or pay $550 for a new iPhone since I can't get a discount with my account renewal until February.  I did it myself, with the help of You Tube and Amazon.  And I'm here to tell you that if I can do can do it too!  Especially if you are like me and just need it to make it a few more months for a replacement.

  I ordered THIS KIT  from Amazon for about $25 and paid extra for it to come in 24 hours.  I was mostly happy with the kit except that the phillips head screwdriver was a little too big and the new face didn't come with a speaker screen.  If you keep those two things in mind, you can be prepared and just transfer the old speaker screen to the new.    The first thing I did before starting was to place clear tape over the broken face of my phone to save my fingers from being sliced up.

  You might not need to do this if you just have a little crack but as you can see...I did serious work on my phone.   Besides the new face, this is what came in the kit.  A star screwdriver, a flat head and a phillips head, two blue puller uppers and a suction cup.    The first thing you do is remove the two star screws.   ...slide up the back and it pops off. Then you get down to business.

..and touch things that you should never have to touch.   I was planning on doing a step by step but I got too involved in what I was doing so I will just refer you to THIS video to take it apart and THIS video to put it back together.  Fixing it yourself is totally doable.  I am not a "tech" person and even I will admit it was easy, even if it was tedious.  Helpful hints:--I would recommend taking a photo of each step for your own help in reassembly.

  I may or may not have ended up with a couple of extra parts.--Have magnetic screwdrivers. --Have a large flat workspace.  In my case I used my cutting mat.  It made keeping track of TEENY screws a lot easier and the bright background was helpful.--Wait until your kids are not around. --Breathe and have chocolate on hand. At the end of the day, I fixed it nearly to the state it was before.  My only tiny issue is that my power button doesn't work, but that doesn't bother me since I never really used it anyway and my phone is set to power off after a minute.

 There is also a small mark on my photos but I can totally work around it.  Both things I can easily live with until February and a small price to pay to save $550.My sound on/off button works better than before so at least there is that. So if you find that your number is up...there is hope.  Have a little confidence in your ability and jump in! Just be aware that this would probably void your warranty and you may be able to sweet talk an Apple nerd to fix it for you.

  If that fails, at least you know you have an option!Also, I was in Best Buy within minutes of fixing it buying an Otterbox. :)

Wilma Lawrence

If you’re prepared to personalize your desktop or monitor saver, or are prepared on a regular basis than the usual photo wallpaper, a awesome screen saver is perfect for you.